Teksealing

Teksealing

Special rings for all hydraulic applications where the PTFE compounds are able to grant high wear resistance, low friction even without lubrication, perfect sealing at low, medium and high pressures.
Not only virgin PTFE, but mainly compounds with bronze, carbon glass fiber.
Download Catalog

Format PDF - 323 Kb

GPS | Double acting seal profile

DH9 dh9 L+0.2 G r O-Ring
GPS-L GPS GPS-P 0÷200 Bar 0÷400 Bar
15÷39.9 8÷14.9 D-4.9 2.2 0.6÷0.4 0.4÷0.3 0.4 1.78
40÷79.9 15÷39.9 D-7.5 3.2 0.8÷0.5 0.5÷0.3 0.6 2.62
80÷132.9 40÷79.9 15÷39.9 D-11.0 4.2 0.8÷0.5 0.5÷0.3 1.0 3.53
133÷329.9 80÷132.9 40÷79.9 D-15.5 6.3 1.0÷0.6 0.6÷0.4 1.2 5.34
330÷669.9 133÷329.9 80÷132.9 D-21.0 8.1 1.0÷0.6 0.6÷0.4 1.8 6.99
670÷999.9 330÷669.9 133÷329.9 D-24.5 8.1 1.2÷0.8 0.8÷0.5 1.8 6.99
670÷999.9 330÷669.9 D-28.0 9.5 1.4÷0.8 0.8÷0.6 2.0 8.40

GPR | Essentially one-way seal profile

DH9 dh9 L+0.2 G r O-Ring
GPR-L GPR GPR-P 0÷200Bar 200÷400 Bar
17÷26.9 8÷16.9 D-4.9 2.2 0.5÷0.3 0.4÷0.2 0.4 1.78
27÷59.9 17÷26.9 D-7.3 3.2 0.7÷0.3 0.5÷0.2 0.6 2.62
60÷199.9 27÷59.9 17÷26.9 D-10.7 4.2 0.8÷0.4 0.5÷0.3 1.0 3.53
200÷255.9 60÷199.9 27÷59.9 D-15.1 6.3 0,9÷0.6 0.6÷0.4 1.2 5.34
256÷669.9 200÷255.9 60÷199.9 D-20.5 8.1 1.0÷0.6 0.7÷0.4 1.8 6.99
670÷999.9 256÷669.9 200÷255,9 D-24.0 8.1 1.1÷0.8 0.8÷0.5 1.8 6.99
670÷999.9 256÷669.9 D-27.3 9.5 1.2÷1.0 1.0÷0.6 2.0 8.40

GCS | Double acting seal profile

d h9 D H9 L+0.2 G r 0-Ring
GCS-L GCS GCS-P 0÷200 Bar 200÷400 Bar
8÷18.9 3÷7.9 d+4.9 2.2 0.4÷0.3 0.3÷0.2 0.4 1.78
19÷37.9 8÷18.9 d+7.3 3.2 0.5÷0.3 0.3÷0.2 0.6 2.62
38÷199.9 19÷37.9 8÷18.9 d+10.7 4.2 0.7÷0.4 0.4÷0.2 1.0 3.53
200÷255.9 38÷199.9 19÷37.9 d+15.1 6.3 0.8÷0.6 0.6÷0.4 1.3 5.34
256÷649.9 200÷255.9 38÷199.9 d+20.5 8.1 0.8÷0.6 0.6÷0.4 1.8 6.99
650÷999.9 256÷649.9 200÷255.9 d+24.0 8.1 0.9÷0.7 0.7÷0.4 1.8 6.99
650÷999.9 256÷649.9 d+27.3 9.5 1.0÷0.8 0.8÷0.6 2.5 8.40

GCR | Essentially one-way seal profile

d h9 D H9 L+0.2 G r 0-Ring
GCR-L GCR GCR-P 0÷200 Bar 200÷400 Bar
8÷18.9 3÷7.9 d+4.9 2.2 0.6÷0.4 0.4÷0.2 0.4 1.78
19÷37.9 8÷18.9 d+7.3 3.2 0.8÷0.5 0.5÷0.3 0.6 2.62
38÷199.9 19÷37.9 8÷18.9 d+10.7 4.2 0.8÷0.5 0.5÷0.3 1.0 3.53
200÷255.9 38÷199.9 19÷37.9 d+15.1 6.3 1.0÷0.6 0.6÷0.4 1.3 5.34
256÷649.9 200÷255.9 38÷199.9 d+20.5 8.1 1.0÷0.6 0.6÷0.4 1.5 6.99
650÷999.9 256÷649.9 200÷255.9 d+24.0 8.1 1.2÷0.8 0.8÷0.6 1.5 6.99
650÷999.9 256÷649.9 d+27.3 9.5 1.4÷1.0 1.0÷0.7 2.5 8.40

GR/C | Scraper

d h9 DH9 L+0.2 d1 H1 1 r O-Ring
GR/C
6÷11.9 d+4.8 3.7 d+1.5 0.4 1.78
12÷64.9 d+6.8 5.0 d+1.5 0.7 2.62
65÷250.9 d+8.8 6.0 d+1.5 1.0 3.53
251÷420.9 d+12.2 8.4 d+2.0 1.2 5.34
421÷650.9 d+16.0 11.0 d+2.0 1.5 6.99
651÷999.9 d+20.0 14.0 d+2.5 2.0 8.40

GPS/R | Rotary seal profile

D H9 d h9 L+0.2 r G 0-Ring
Serie 0÷200 Bar 200÷300 Bar
GPS/R-0 6÷18.9 D-4.9 2.2 0.3 0.3÷0.2 0.15÷0.1 1.78
GPS/R-1 19÷37.9 D-7.5 3.2 0.5 0.6÷0.4 0.3÷0.2 2.62
GPS/R-2 38÷199.9 D-11.0 4.2 0.7 0.6÷0.4 0.3÷0.2 3.53
GPS/R-3 200÷255.9 D-15.5 6.3 1.0 0.8÷0.6 0.4÷0.3 5.34
GPS/R-4 256÷649.9 D-21.0 8.1 1.2 0.8÷0.6 0.4÷0.3 6.99
GPS/R-5 650÷999.9 D-28.0 9.5 1.5 1.2÷0.9 0.6÷0.5 8.40

GCS/R | Rotary seal profile

d h9 D H9 L+0.2 r G 0-Ring
Serie 0÷200 Bar 200÷300 Bar
GCS/R-0 6÷18.9 d-4.9 2.2 0.3 0.3÷0.2 0.15÷0.1 1.78
GCS/R-1 19÷37.9 d-7.5 3.2 0.5 0.6÷0.4 0.3÷0.2 2.62
GCS/R-2 38÷199.9 d-11.0 4.2 0.7 0.6÷0.4 0.3÷0.2 3.53
GCS/R-3 200÷255.9 d-15.5 6.3 1.0 0.8÷0.6 0.4÷0.3 5.34
GCS/R-4 256÷649.9 d-21.0 8.1 1.2 0.8÷0.6 0.4÷0.3 6.99
GCS/R-5 650÷999.9 d-28.0 9.5 1.5 1.2÷0.9 0.6÷0.5 8.40

Bearing tapes

For the heaviest applications in the hydraulic field. motion control and mechanical field. Guarniflon® developed a new family of products. made by special PTFE compounds and devoted technologies. in order to fulfil Guarniflon® customers’ requirements.
Compounded PTFE materials with bronze. carbon. graphite or other fillers are designed to enhance properties such as:
- wear resistance
- coefficient of friction
- compression strength

Thickness from 1.5 mm. up to 5 mm. Width from 4 mm. up to 300 mm.
Available:
- with sharp edges
- with chamfers on 2 or 4 angles
- knurled on 1 or 2 sides
- etched on 1 or 2 sides

Rolls Length
Tickness mm.
Length mt.
1.5
35
2
25
2.5
20
3
16
4
24

Materials

VIRGIN PTFE
Good chemical resistance. Fair wear resistance.
Excellent coefficient of friction.
PTFE + GLASS FIBER
Enhanced wear resistance. Enhanced chemical resistance. Good compression resistance.
PTFE + CARBON
Good thermal and electrical conductivity. Good resistance to deformation. Excellent resistance to load with low coefficient of friction and high wear resistance.
Enhanced chemical resistance.
PTFE + BRONZE
Enhanced compressive strength. Good wear resistance and high thermal conductivity. Guarniflon® has available more than 80 different compounds providing solutions to the most tribological applications. Available on request.

NEWS& EVENTS

Tuesday, 11 June 2019 10:37

GUARNIFLON – IN FULL COMPLIANCE WITH INTERNATIONAL QUALITY NORMS

Whether you design, manufacture or supply materials, you need to comply with international norms, standards, Directives and Regulations across the world.

READ MORE
Monday, 03 June 2019 07:47

FLONTECH HAS ITS NEW WEB SITE

We’ve been working hard to prepare the new Flontech web site and it is now on-line (www.flontech.com) ! As everybody knows, Flontech is the compounding division of Guarniflon, offering top quality PTFE, PEEK and fluorinated thermoplastics raw materials.

READ MORE

347 Moorside Road - Swinton
Manchester M27 9HH - United Kingdom
Phone: +44 (0) 161 793 7628 | Fax: +44 (0) 161 793 7629
www.maceplastuk.com - info@maceplastuk.com

FOLLOW US IN LINKEDIN